Loading... Please wait...

Our Newsletter

Tuning Pins for Dulcimer, Zither, Harpsichord or Harp - Set of 50

  • Nickel Dulcimer/Zither Tuning Pins
  • Blued Dulcimer/Zither Tuning Pins
Calculated at checkout

Product Description

  • For Hammered Dulcimer, Zither, Harpsichord or Harp
  • Package of 50 tuning pins
  • Bright Nickel or Blued Finish
  • Diameter: .198" (5.03 mm) Length: 1-5/8" (41.275 mm)
  • The top of the square portion of the pin is approximately 1/8" or 4 mm
  • High Quality Product

We also have tuning wrenches and levers for this size tuning pin available.

If you're wondering what size drill bit to use to drill the holes for the tuning pins, this will depend on the type of wood you're using for your pinblock.  It's usually best to drill a sample hole in a scrap piece of the wood you'll be using for the pins.  A good starting point would be to use a 3/16" bit.

Find Similar Products by Category