Description
Replacement Billings style brass hammer butt flange. For use with the brass rail style hammer butts. Available individually or in a set of 6 or a set of 90.
Customers Also Viewed
Brass Piano Hammer Butt Plates
Schaff Piano Supply
MSRP:
Now:
$14.95 - $99.95
Was:
Extra heavy brass butt plates for replacing broken butt plates on upright pianos. Plates are 1/2" long and 3/16" wide. Includes screws. Available in a set of 12 or a set of 100.
Baldwin Wire Finger Nuts for Drop Lifter Wires
Schaff Piano Supply
MSRP:
Now:
$7.50 - $49.95
Was:
Set of 12 Wire Finger Nuts for placing over the donut lifter grommets on a Baldwin or similar brand spinet piano. Available in a set of 12 or a set of 100.
Balance Rail Paper/Cardboard Punchings - Package of 1,000
Schaff Piano Supply
MSRP:
Now:
$8.95 - $12.95
Was:
Package of 1,000 punchings available in your choice of several different sizes (Choose Size Below)
1/2" in diameter
Essential for leveling piano keys
Sizes Available:
.003"
.005
.007"
...
Adjustable Upright Sticker
Schaff Piano Supply
MSRP:
Now:
$10.50
Was:
Adjustable sticker for upright pianos
Comes unassembled
The sticker can be made the correct length by cutting the dowel and gluing on both ends.
Please choose from the two sizes...
Asian Type Upright Piano Hammer Butt
Schaff Piano Supply
MSRP:
Now:
$6.95 - $445.00
Was:
Asian Upright Hammer Butt - Manufactured in Japan. Will fit most Yamaha pianos as well as many other Asian brands of pianos including some Kawai pianos. Available individually or in a...
Balance Rail Paper/Cardboard Punchings - Assortment of 5,000
Schaff Piano Supply
MSRP:
Now:
$43.95
Was:
Assortment of 10 different sizes of paper and cardboard punchings
1/2" in diameter
Approximately 500 punchings per size
Total of 5,000 punchings
Essential for leveling piano keys
Sizes...
Aluminum Straight Edge for Piano Key Leveling
AMS Piano Tools
MSRP:
Now:
$10.95
Was:
Easy to use tool to check the level on the piano keys. Place the straight edge across a group of keys and adjust the balance rail punching to raise any keys that are low or lower any keys that...
Balance Rail Felt Punchings
Schaff Piano Supply
MSRP:
Now:
$7.50 - $9.50
Was:
Full set (Approximately 100 punchings)
Made from firm, high quality felt
1/2" in diameter
Replacement for worn or moth-eaten punchings
Available in the following thicknesses:
Thin - ...
Balance Hole Easer
AMS Piano Tools
MSRP:
Now:
$17.95
Was:
Use with a combination tool handle, tapered tool to be inserted from the top bushing side of the key so the balance hole can be properly sized.4 inches long.
Backcheck & Bridle Wire Regulating Tool
AMS Piano Tools
MSRP:
Now:
$14.95
Was:
A back check and bridle wire bending tool.Straight, 8 inches long, chrome plated. This tool is designed to be used with the combination tool handle.Quality Tool manufactured in the USA