Piano Regulating Tools

Plastic gauge for quickly measuring:   1.  Let-off 1/8”   2.  Hammer Blow Distance 1-7⁄8”   3.  Backcheck Distance 5/8”

Helpful tool for measuring string height on a grand piano in order to regulate the action on your workbench.  This tool is also able to take grand damper measurements for the purpose of regulating the damper height.  The 3rd use of this tool is...

This is a must-have tool for any serious technician. Etched measurements make it easy to read down to 1/32 of an inch or to the nearest 1 mm. On the reverse, is a handy decimal equivalent chart for quick reference. The sliding clip can be used as a depth...

Tool has 5/16 inch opening for turning large regulating screws. Shaft is 1/8 inch in diameter to allow easy access into piano action. This tool is designed to be used with the combination tool handle.Quality tool manufactured in the USA.

Designed for hard to reach action screws, blade is 3/8 inch wide with shank diameter of 1/4 inch tapering to 5/32 inch.  Designed with a wide blade which is useful in pushing the jack forward out of the way.This tool is designed to be used with the...

8" chrome plated screwdriver with 1/4" wide blade and a 3/16" wide shaft.  For use with any of our combination tool handles.

This tool is designed with a 1/8" long recessed opening that helps locate and regulate grand repetition lever screws along with spade head regulating screws that are 1/8" wide.  1/8" diameter shanks and chrome plated.  9" long.  This tool...

Easy to use tool to check the level on the piano keys.  Place the straight edge across a group of keys and adjust the balance rail punching to raise any keys that are low or lower any keys that are high.  Tool is 14" long, 1/4" thick and 1/2"...

A back check and bridle wire bending tool.Straight, 8 inches long, chrome plated. This tool is designed to be used with the combination tool handle.Quality Tool manufactured in the USA

Use with a combination tool handle, tapered tool to be inserted from the top bushing side of the key so the balance hole can be properly sized.4 inches long.

Solid Wood Handle (4" long) 3" steel shaft and collet Steel collar which tightens by turning clockwise for a firm grip on the tool shaft For use with a large variety of piano repair and regulating tools Made in the USA This...

Solid Hard Plastic Handle 5" long Interior Steel Core Steel collar which tightens by turning clockwise for a firm grip on the tool shaft For use with a large variety of piano repair and regulating tools High Quality Tool Manufactured in the US This...

Friction Tool Handle Black plastic handle is 2.5 inches long For use with 1/4" shank regulating tools

This set of brass weights is useful in regulating the touch resistance of piano keyboards.  Graduated from 1 to 63 grams, any weight can be achieved within this range in 1 gram increments.

This tool has a 1/8 inch long recessed opening that helps locate and regulate grand repetition lever screws.1/8 inch diameter chrome plated shank, 2 inch plastic handle, total length 7 inches. Quality tool manufactured in the USA

Made of tool steel, 7 inch blade with 1/8 inch shaft.  2 inch plastic handle.  Excellent tool for adjusting grand drop screws with the slotted heads and repetition lever screws as well as damper action screws.Quality tool manufactured in the...

Straight burnishing tool for easing the grand piano damper guide rail bushings.  This tool is designed to be used in a power drill and is used to iron the felt by causing friction to build up heat on the felt as the tool burnishes the felt. ...

Grand Damper Hook Designed to come up and under the strings over the guide rail, and fit around the damper wire near the damper head for precise regulation. The hook has a 5/64 inch slot and a 3/16 inch diameter. Total length 12 inches, chrome plated.

This tool is designed to correctly space grand hammer flanges which will bring the shanks and hammer heads into alignment.  Tool is 6-1/2 inches long.  One end has a 3/8" opening and the other end has a 5/16" opening.

Set of 52 brass spring clip leads weighing 3 oz. each, comes with a reinforced fiberboard case with straps that measures 6-1/2" square.  These leads, which fit over the backchecks, replace the weight of the grand action when the keyboard is removed...