Schaff Piano Supply
Tuning Pins for Dulcimer, Zither, Harpsichord or Harp - Set of 25
$19.95
- Bulk Pricing:
- Buy in bulk and save
- Buy 2 - 3 and get $0.95 off
- Buy 4 - 9 and get $1.45 off
- Buy 10 - 19 and get $1.70 off
- Buy 20 - 100 and get $2.20 off
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
Frequently bought together
Product Details
- For Hammered Dulcimer, Zither, Harpsichord or Harp
- Set of 25 tuning pins
- Bright Nickel or Blued Finish
- Diameter: .198" (5.03 mm) Length: 1-5/8" (41.275 mm)
- The top of the square portion of the pin is approximately 1/8" or 4 mm
- High Quality Product made in Japan by Denro
***Quantity Discount available on these pins
We also have tuning wrenches and levers for this size tuning pin available.
If you're wondering what size drill bit to use to drill the holes for the tuning pins, this will depend on the type of wood you're using for your pinblock. It's usually best to drill a sample hole in a scrap piece of the wood you'll be using for the pins. A good starting point would be to use a 3/16" bit.
